PROFILE PRODUCTS SERVICES
Asbestos Rubber Sheets
Asbestos Rubber Sheet with wire net strengthening
Oil-Resistance Asbestos Rubber Sheets
Acid-Resistance Asbestos Rubber Sheets
Non-Asbestos Jointing Sheets
Asbestos Latex Paper / Sheet
Non-Asbestos Latex Paper / Sheet
Asbestos Rubber Gasket
Industrial Rubber sheet
Cylinder Head Gasket Materials
Asbestos Cloth, Rope,Tape
Braided Packing Series
Ceramic Fibre Products
Glass Fibre Products
Sight Glass
NXB200 Non-Asbestos Jointing Sheets NXB300 Non-Asbestos Jointing Sheets
NXB350 Non-Asbestos Jointing Sheets NNY150 Non-Asbestos Jointing Sheets
NNY250 Non-Asbestos Jointing Sheets NNY300 Non-Asbestos Jointing Sheets
NNY350 Non-Asbestos Jointing Sheets    

Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting Fibre, heat-resisting packing material, and special rubber compound heating and compression molding it.

Material: Made of special non-asbestos heat-resisting Fibre, heat-resisting packing material and oil-resistance synthetic rubber compound heating and compression molding it.
Uses: Substitution of corresponding models of asbestos rubber sheet , Mainly used as the sealing gasket material for the equipment in kerosene, petrochemical, alkali, solvent, fuel oil, petroleum-based lubricating oil and other mediums.
 Working pressure : 2MPa ,Working temperature : 150℃
4100 x 1500 x (0.5 – 6.0)mm,  2000 x 1500 x  (0.5 – 6.0)mm,
1500 x 1360 x (0.5 – 6.0)mm,  3810 x 1270 x (0.5 – 6.0)mm
1270 x 1270 x (0.5 – 6.0)mm,  1500 x 1500 x (0.5 – 6.0)mm
The other size is optional or according to the requirements of customers.
Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.

Item

NXB200

NXB300

NXB350

NNY150

NNY250

NNY300

NNY350

Tensile strength MPa≥

5.0

7.0

11.0

8.0

10.0

12.0

15.0

Aging Coefficient ≥

0.9

Density   g/cm³

1.6 — 2.0

1.6 — 1.8

Compressibility %

12 ± 7

Rebound degree

35

40

45

40

45

50

50

Pliability

No Crack

Stress-relaxation≤

45

45

45

40

40

30

30

Oil sealing
With the temperature
of 15℃to 30℃,.75﹟aviation gasoline for 30 min

 

 

 

10 MPa pressure for 30 min
No leaking

12 MPa pressure for 30 min
No leaking

15MPa pressure for 30 min
No leaking

16 MPa pressure for 30 min
No leaking

With the temperature of 150±2℃,dipped in No.20 aviation oil for 5h,then taken out and laid for 5min.

Tensile strength-reducing %

40

30

25

25

Thickness-increasing %≤

5—20

5—20

5—18

5—18

Appearance change

No bubble

With the temperature
of 15 to 30 ℃,dipped in No.75 aviation oil for 5h,then taken out and laid for 5min.

Tensile strength MPa ≥

5

6

8

10

Thickness-increasing %

5—25

5—25

5—20

5—20

Pliability

No Crack

 
  Address:1505-1506 Fuyuan Building,Quanyechang,Hengshui,Hebei, China (P.C.053000)
Fax:+86 318 7080093 / 7080094 Tel:+86 318 7906186 / 7080091 / 7080092 / 7080095
E-mail: sales@asbestos-joint.com
Homepage: http://www.asbestos-joint.com